Type: Elbow
Size: 1/4”---6”
Threaded Standard: BS / NPT/DIN
Product Description
Malleable iron pipe fittings: Side outle Elbows Tees Equal FIG 233 NPT/BSP
Galvanized/Black Malleable Iron Pipe Fittings Standard Specification
| Standard | American Class 150 | Brithish Standard | European |
| ANSI/ASME B 16.3 | |||
| Dimention | ANSI/ASME B 16.14 | KSB 1531 | EN 10242 |
| ANSI/ASME B 16.39 | |||
| Threads | ANSI/ASME B1.20.1 | BS 21 | ISO 7-1 |
| BS 2779 | ISO 228-1 | ||
| Material | ASTM A-197 | BS EN 1562 | EN1562 |
| Zinc Coating | ASTM A-153 | BS 143&1256 | EN10242 |
| Reinforcement | Banded | Banded | Beaded |
Type: Elbow
Size: 1/4”---6”
Threaded Standard: BS / NPT/DIN
Surface: Hot dipped galvanized, Toast galvanized, Black
| Description | Chemical Properties | Physical Properties | |||||
| Lot No. | C | Si | Mn | P | S | Tensile Strength | Elongation |
| ALL PALLET | 2.76 | 1.65 | 0.55 | Less Than 0.07 | LessThan 0.15 | 300Mpa | 6% |
Usage: Fire Protection(Fire Fighting), plumbing, infrastructure construction, decoration, etc.
Tensile Strength: ≥33 KG/MM2
Elongation: ≥8%
Hydness: ＜HB163
Hydraulic Test Pressure: 25 KG/MM2
Working Pressure: 16 KG/MM2
Packing: Carton/ Bags /Pallet
Delivery: 45 days after the payment
Payment: TT, LC, etc.
Producing Process:
Melting the raw materials with sand core to form a primary casting, and then put into the annealing furnace annealing. After reforming .flating .sand blasting then picking the casting. the blank is galvanized, next making the threa and cleaned with cutting liquid for packing, and finally loading.
Malleable fittings are usually used to connect steel pipes. However, galvanized malleable fittings are used for galvanized pipe. Malleable iron pipe fittings are most common among malleable fittings and are available in many different types and sizes. If you have any question about these fittings or want to buy one, don't hesitate to contact us.
