Black pipe side outlet elbow is a type of pipe fitting that is used to connect two pipes at a 90-degree angle. It consists of a main body with a side outlet, which allows for the connection of an additional pipe.
Product Description
Black pipe side outlet elbow is a type of pipe fitting that is used to connect two pipes at a 90-degree angle. It consists of a main body with a side outlet, which allows for the connection of an additional pipe. The black pipe side outlet elbow is made of black, heavy-duty steel and is used in industrial and commercial piping systems.
• Durability: Black pipe side outlet elbows are made of heavy-duty steel, which makes them resistant to corrosion and wear.
• Versatility: They can be used to connect pipes of different sizes and materials, such as steel, iron, and PVC.
• Ease of installation: Black pipe side outlet elbows can be easily installed by slipping the fitting over the end of the pipe and securing it with bolts.
• Connecting pipes at a 90-degree angle: The main use of black pipe side outlet elbows is to connect two pipes at a right angle. This is often necessary in piping systems where pipes need to be routed around obstacles or in different directions.
• Adding branches to a piping system: The side outlet on a black pipe side outlet elbow allows for the connection of an additional pipe, which can be used to add branches to a piping system.
• Repairing or modifying existing piping systems: Black pipe side outlet elbows can be used to repair or modify existing piping systems by connecting new pipes or redirecting the flow of the existing pipes.
Looking for wholesale black pipe side outlet elbows from trusted supplier, welcome to contact us for more information!
Malleable iron pipe fittings: Side outle Elbows Banded Equal FIG 221 NPT/BSP
Type: Side outle Elbows
Size:1/4”---6”
Threaded Standard: BS / NPT/DIN
Surface: Hot dipped galvanized, Toast galvanized, Black
Description | Chemical Properties | Physical Properties | |||||
Lot No. | C | Si | Mn | P | S | Tensile Strength | Elongation |
ALL PALLET | 2.76 | 1.65 | 0.55 | Less Than 0.07 | LessThan 0.15 | 300Mpa | 6% |
Tensile Strength: ≥33 KG/MM2
Elongation: ≥8%
Hydness: <HB163
Hydraulic Test Pressure:25 KG/MM2
Working Pressure: 16 KG/MM2
British Standard | Dimension: BS EN 10242,BS 143&1256 |
Chemical Property | (C %2.4-2.9),(Si%1.4-1.9),(Mn %0.4-0.65),(p%<0.1),(S%<0.2) |
Physical Property | Tensile strength≥300MPa,Elongation≥6%,Hardness≤150HB |
Testing Pressure | 2.5MPa |
Working Pressure | 1.6MPa |
Type | Banded without ribs,beaded with ribs. |
Size | 1/8”,3/8”,1/2”,3/4”,1”,1.1/4”,1.1/2”,2”,2.1/2”,3”,4”,5”,6” |
Surface | Galvanized |
Toast/bake ,Black | |
Series | Heavy,Standard,Medium,Light |
Model | Elbows.Tees,Crosses,Unions,Bends,Bushings,Sockets,Nipples,Caps, Plugs,Locknuts,Side Otlet Tees,Reducing Elbows,etc. |
Connection | Male,Female |
Shape | Equal, Reducing |
Applications | Suitable for Pipe lines connect of water,steam,air,gas,oil and so on. |
Buyer’s drawings or designs are available. | |
Package | 1.Cartons without pallets. |
2.Cartons with pallets. | |
3.Double woven bags. | |
4.Can as buyer’s requirements. | |
Delivery detail: | |
According to the quantities and specifications of each other. | |
Normal delivery time is from 30 to 45 days after receiving the deposit. |
Producing Process:
Melting the raw materials with sand core to form a primary casting, and then put into the annealing furnace annealing. After reforming .flating .sand blasting then picking the casting. the blank is galvanized, next making the threa and cleaned with cutting liquid for packing, and finally loading.
Our products are mainly used in water systems, petrochemical systems, gas systems, and water heating systems.
Malleable iron pipe fittings are most common among malleable fittindgs and are available in many different types and sizes. If you have any question about these fittings or want to buy one, don't hesitate to contact us.